westernex 1141-00502
westernex 1141-00502westernex 1141-00502 2

KT-10 Plus v2 Magnetic Susceptibility Meter

SKU: 1141-00502-Cparent-C

: Each


Features & Benefits
The KT-10 Plus v2 has an extended measurement range permitting the user to measure iron ore samples and drill cores up to 10 SI units. It is also equipped with a pre-installed calibration curve, giving the user the ability to obtain the concentration estimate of iron ore directly from the instrument’s display.

Standard Configuration

  • KT-10 Plus v2 Console with pin and wrist strap
  • 10kHz sensor (circular design)
  • 2 x AA alkaline batteries
  • Spare pin
  • GeoView Software CD
  • Operations manual and Quick Start guide
  • Small pouch with foam insert


  • Sensitivity: 1 x 10-6 SI Units
  • Measurement Range: 0.001 x 10-3 to 9999.999 x 10-3 SI Units Auto-Ranging (10 SI Units)
  • Operating Frequency: 10kHz
  • Measurement Frequency: 20x per second (in Scan mode, 5 readings averaged together and 4 readings/second stored)
  • Display: High contrast LCD graphic display with 104 x 88 pixels
  • Memory: 4GB/4000 Total records stored, discrete and scanner records can be combined (4000 scanner measurements with up to 480 data points per record/total of 1 920 000 individual data points; 4000 discrete measurements with 120 seconds of voice notes per reading)
  • Control: 1 button with up/down functionality
  • Data In/Output: USB, Bluetooth with GPS link via Bluetooth
  • Power Supply: 2 x AA alkaline batteries or 2 x optional AA rechargeable batteries
  • Battery Life: Up to 4000 readings without voice recorder
  • Operating Temperature: -20°C to 60°C
  • Dimensions: 200mm x 57mm x 30mm
  • Coil Dimensions: 65mm (diameter)
  • Weight: 0.33kg with 2 x AA alkaline batteries
  • GeoView Software: Supports all Windows 32 to 64 bit operating systems


  • Measurement Range Increased to 10 SI Units – Increased range of up to 10 SI units, allowing the user to measure and analyse samples with high magnetite content
  • Direct Iron Ore concentration Measurement Estimates
  • Pre-Installed Calibration Curve – Based on magnetite with different concentrations
  • Programmable Calibration Curve Capability – Additional calibration curves specific to the samples and cores being measured are programmable
  • Depth Correlation
  • Split and Full Core Corrections – The user can select from a range of drill rod diameters (A, B, N, H, and P) or non-standard ones from 2.4 to 12cm
  • Measure in SI or CGS Units
  • Upgrades and Support Available Online
  • High Sensitivity
  • Fast and accurate Scanning
  • Quality Control (QC) Parameters
  • Calibration
  • Uneven Surface Measurements

Upgrade Options

  • New Rectangular Coil Available – This model is available in two different coil configurations: circular coil (the standard) and rectangular coil (which is beneficial for measuring core samples with small diameters; not interchangeable)
  • KT-10 Plus S/C – This upgrade allows the user to read both magnetic susceptibility and conductivity measurements simultaneously. The KT-10 Plus S/C provides the user with the added benefit of being able to obtain iron ore concentration estimates from samples or drill cores. The upgrade includes a copy of the GeoVision Android app. This upgrade can be performed online using the GeoView software.

Download catalogue

Download our full catalogue now to view our full product range in your own time.

Download Now