Spill Control & DG Storage | Westernex Australia

Aerosolv® 7000 Safe Aerosol Recycling System

Marketing — Fri, 09 Jun 2023 04:48:00 +0000

Aerosolv® Model 7000 Safe Aerosol Can Recycling System
Processing aerosol cans with the Aerosolv system results in an empty steel can with a small, smooth-edged hole, in five seconds, without spills or jagged edges.
And, is no compressed gas, so it’s ready for recycling with other scrap steel. This Simplifies Aerosol Can Disposal, the Aerosolv puncturing unit threads directly to the 50mm (2”) bung of any 60 or 205L drum. Simply place an aerosol can into the Aerosolv unit and lock the safety cap. With a press of the handle, a carbide-tipped puncture pin pierces the dome of the can. The carbide tip is non-sparking, one of many safety features you’ll appreciate.

Liquids, Collect Directly into the Drum
That’s the neatest feature of the system. Residual liquids collect safely in the drum, ready for eventual transportation without further handling. And one 205L drum will hold the residual liquids from 4,000 spent aerosol cans. As a solid waste, the same cans would require at least forty 205L lab-pack drums at a disposal cost of $20,000 or more.

Residual Propellant is Filtered of VOCs
The Combination Filter threads directly to the 20mm (3/4”) bung of the drum, one of the many safety features incorporated into the system. Although not required for aerosol can disposal, the filter addresses air quality and emissions standards.

The Combination Filter features
The base of the Combination Filter is the Coalescing Cartridge. In it, the specially designed filter media coalesces microscopic liquids from the escaping propellant and forms them into droplets. The droplets collect in the reservoir of the Coalescing cartridge and can be easily drained, directly into the drum if desired, by opening the drain valve on the bottom. Dry propellant then moves through the Activated Carbon Cartridge that adsorbs hydrocarbons and odor.

The Activated Carbon Cartridge Contains
500 grams of Activated Carbon Made from ground coconut shell, the activated carbon promotes rapid evacuation of the propellant from even a full aerosol can. The advanced colourmetric carbon cartridge will clearly indicate cartridge replacement for
maximum efficiency.

Accommodates a wide assortment of aerosol cans, even 75mm jumbo cans.
Whatever size can, the Aerosolv unit smoothly pierces the dome.

Puncture Pin: Designed for safety and longevity, the Puncture Pin is non-sparking and has shown no visible wear after 10,000 uses.
And the punctured can have no sharp jagged edges or crushed metal.

Aerosolv Model 7000 Includes

Advanced Puncturing Device-Teflon Coated
Automatic Shut-off Valve
Combination Colormetric Carbon Filter
Anti-Static Wire
Safety Goggles

Maintenance Repair Kit – Accessories

1 x Carbide-Tipped Puncture Pin with O-Rings
1 x Aeroprene Gasket
1 x Spring
3 x Bridge
Pins
1 x Tube of Grease
Aeroprene Gasket
Viton® Gasket (Viton® is a registered trademark of DuPont de Nemours & Co.)

Replacement Parts – Filters

Combination Coalescing Filter with Replaceable Colormetric Carbon Cartridge.
Replacement Colormetric Carbon Cartridges (pack of 2)

The post Aerosolv® 7000 Safe Aerosol Recycling System appeared first on Westernex Australia.

General Purpose Absorbent Minibooms

Marketing — Thu, 20 May 2021 05:18:40 +0000

PRODUCT DESCRIPTION:

MAXSorb General Purpose Minibooms are ideal for work sites that have various forms of liquid in storage. Manufactured from heavy-duty, robust materials, these minibooms are capable of absorbing a wide range of substances.

The post General Purpose Absorbent Minibooms appeared first on Westernex Australia.

OIL & FUEL ABSORBENT ROLL

petrawebstein — Thu, 20 May 2021 03:22:29 +0000

PRODUCT DESCRIPTION:

MAXSorb Oil & Fuel Absorbent Rolls feature our hydrophobic oil & fuel absrobent material, which absorbs all hydrocarbons and repels water. Available in two different widths, these rolls fit perfectly on our roll Dispensers

The post OIL & FUEL ABSORBENT ROLL appeared first on Westernex Australia.

OIL & FUEL MINIBOOMS

Westernex Admin - Richard Webb — Thu, 20 May 2021 03:16:52 +0000

PRODUCT DESCRIPTION:

MAXSorb Oil & Fuel Absorbent Minibooms ( 75mm X 3 meter) have been designed to absorb hydrocarbons while repelling water, preventing contamination.

The post OIL & FUEL MINIBOOMS appeared first on Westernex Australia.

120L Oil & Fuel – Econo Kit

petrawebstein — Thu, 20 May 2021 02:58:49 +0000

DESCRIPTION:

– 2 x 75mm x 1.2 absorbent minibooms
– 25 x 400mm x 450mm absorbent pads
– 1 x 10kg MaxSorb premium floorsweep *or similar
– 1 x brush and pan set
– 1 x elbow length PVC gloves
– 2 x Heavy duty printed disposal bags
– 1 x 120L labelled wheelie bin
– 1 x product instruction sheet including re-order form

The post 120L Oil & Fuel – Econo Kit appeared first on Westernex Australia.

Drum Racking Bund

Westernex Admin - Richard Webb — Thu, 20 May 2021 02:05:49 +0000

DESCRIPTION:

The Poly Racking Bund is a simple and safe way of bunding drums that are stored in standard racking. They are designed to suit standard pallet racking and help in preserving warehouse space. Its 220L bund capacity meets all relevant regulations for safe storage of up to 4 x 205L drums. MXP5001 has a Safe Working Load of 100kg.

The post Drum Racking Bund appeared first on Westernex Australia.

HAZCHEM PILLOWS

Marketing — Tue, 18 May 2021 06:44:33 +0000

PRODUCT DESCRIPTION:

MAXSorb Hazchem Pillows are able to retain their shape and strength when absorbing harsh chemicals, ensuring safe and easy disposal.

The post HAZCHEM PILLOWS appeared first on Westernex Australia.

GENERAL PURPOSE ABSORBENT PILLOWS

petrawebstein — Tue, 18 May 2021 06:44:27 +0000

PRODUCT DESCRIPTION:

MAXSorb General Purpose Absorbent Pillows are available in two sizes and offers a high level of absorbancy to soak up larger spills in concentrated areas. Ideal for absorbing oil, coolants, solvents, and water, the compact design allows for spill absorbtion in tight spaces.

The post GENERAL PURPOSE ABSORBENT PILLOWS appeared first on Westernex Australia.

240L Hazchem Spill Kit

petrawebstein — Tue, 18 May 2021 06:39:06 +0000

DESCRIPTION:

– 6 x 75mm x 3.0m absorbent minibooms
– 100 x 410mm x 460mm perforated absorbent pads
– 1 x 10kg MaxSorb premium floorsweep *or similar
– 1 x industrial brush and pan set
– 2 x elbow length PVC gloves
– 8 x Heavy Duty printed disposal bags
– 1 x 240L labelled wheelie bin
– 1 x product instruction sheet including re-order form

The post 240L Hazchem Spill Kit appeared first on Westernex Australia.

120L Hazchem Spill Kit

petrawebstein — Tue, 18 May 2021 06:29:49 +0000

DESCRIPTION:

– 3 x 75mm x 3.0m absorbent minibooms
– 50 x 410mm x 460mm perforated absorbent pads
– 1 x 10kg MaxSorb premium floorsweep *or similar
– 1 x industrial brush and pan set
– 1 x elbow length PVC gloves
– 4 x Heavy Duty printed disposal bags
– 1 x 120L labelled wheelie bin
– 1 x product instruction sheet including re-order form

The post 120L Hazchem Spill Kit appeared first on Westernex Australia.