almonte diamond | Westernex Australia

Almonte Automatic Core Saw Continuous Diamond Blade 12″ 300mm

petrawebstein — Mon, 17 Sep 2018 07:16:49 +0000

Almonte Automatic Core Saw Continuous Diamond Blade 12" 300mm is for use on very soft material (such as clays, malachite etc.) and brittle rock, susceptible to shattering if using blades with segments.

The post Almonte Automatic Core Saw Continuous Diamond Blade 12″ 300mm appeared first on Westernex Australia.

Almonte Recycle Water Unit

petrawebstein — Mon, 17 Aug 2015 03:33:46 +0000

This unit was designed to recycle water for use with the Almonte Automatic Core Saw. Using this unit can save up to 8000L of water per day and enables Almonte cutting fluid to be economically used with the saw. Please confirm site power requirements when requesting a quote or order.
Click here for more information.

The post Almonte Recycle Water Unit appeared first on Westernex Australia.

Almonte Automatic

petrawebstein — Mon, 17 Aug 2015 03:33:46 +0000

Features & Benefits

Almonte Automatic is the World’s Safest Core Saw

Please confirm site power requirements when requesting a quote or order.

The Almonte Automatic Core Saw has and is constantly being updated by robotics specialists and automation engineers. It is guaranteed that all electrical equipment and wiring has been installed by qualified and licenced electricians — which is only one of the multiple reasons the saw meets all safety standards.

Almonte Automatic 9

Almonte Automatic 10

Variable Core Sizing

Handles all core from B to P. Pieces up to 400mm long may be fed with ease. Broken core samples are also handled easily.

Self-Flushing

Water, dust and mud spill drains away. Mess is reduced to a tidy minimum.

Almonte Worldwide Safety Standards

The Almonte Automatic Core Saw has qualified for the following safety standards:

C E – The Almonte Core Saw has passed all the vigorous tests to be awarded the safety mark “CE” by the European authorities.
AS 4024 .1501 – Plant safety in the mining industry.
Cat 4 – The Almonte Core Saw qualifies for a Category 4 rating. The Almonte Automatic Core Saw complies with and is recognised by the Australian Safety Standard, Also it is quality controlled by a licenced electrical engineer.
We make core saws suitable for voltages in the range of 220V to 480V, all our saws run on 3-phase power; these saws are supplied at a specific voltage of the country of export.

Almonte Automatic 11

Almonte Automatic 12

Blade Efficiency

The diamond blade life is significantly improved. The motor speed is set to a recommended 2,500rpm for optimum cutting efficiency and a greatly improved blade life. Research and development on our blades is an ongoing task to ensure that we bring you the best in our range.

Operator Safety

The Almonte Automatic Core Saw offers a quantum leap in operator safety and user-friendliness.

Safety features include:

A fully enclosed blade guard.
A unique patented RFID safety device incorporated within the red handle shuts down
the saw if the blade guard is raised exposing the blade.
The RFID system cannot be overridden by inserting something between the sensors.
The drive feed activation is linked to blade operation; neither operates in isolation from the other.
Computer-controlled drives constantly monitor blade speed, pressure and feed chain speed.
Operation shuts down if maximum pressure is exceeded.
A reverse drive mode to enable safe, easy clearance of obstructions.
The control panel is conveniently located at the front of the machine, therefore,
alleviating any risk that can be caused by having to lean over to control the machine which can lead to articles of clothing being caught by moving parts leading to possible injury.

Almonte Automatic 13

Almonte Automatic 14

Heavy Duty

The sturdy construction can be attributed to the heavy-duty steel that is primed and powder coated to resist corrosion and to provide years of hard work and reliability.

Noise Reduction

The sound insulation kit dramatically reduces noise levels and noise fatigue. These kits can be supplied should they wear out or get damaged. Sound-dampened blades will also assist in the
reduction of noise.

Spare Parts

Almonte carries the full range of spare parts for your core saw. All parts are ex-works and in small stock at all times to ensure your machine stays up and running.

Suits Most Power Supplies

The Almonte Automatic Core Saws are available in models to suit the majority of power supplies around the world.

Almonte Automatic 15

Warranty Protection

12 months written warranty applies to motor and gearbox components under normal operating conditions. Replaceable components such as chains and blades are not covered by the warranty.

Visit Almonte Diamond website for more information

Download Almonte Diamond Blade Guide – Hardness Scale

Almonte Automatic 16

The post Almonte Automatic appeared first on Westernex Australia.

Almonte Flip Top Core Carrier

petrawebstein — Mon, 17 Aug 2015 03:33:46 +0000

Features & Benefits

A non -slip designed “V”style base holder which means less core rotation during the cutting process
Pre-cut slot in the base to reduce the amount of plastic cuttings upon the first initial cut

Exclusive features of the NQ 2 Core Guide

NQ2 guide now holds both NQ and NQ2 – eradicating the need for two separate holders

The post Almonte Flip Top Core Carrier appeared first on Westernex Australia.

Almonte Automatic Core Saw Diamond Blade 12″ 300mm

petrawebstein — Mon, 17 Aug 2015 03:33:46 +0000

Features & Benefits

Black Blade (Sound Dampened)/Grey Blade (Normal)
The Black/Grey blade is used for hard to very hard cores e.g. Magnetite & banded iron. The Green and White Blades are an alternative and are dependent on the composition of the rock.

Green Blade
The Black blade is the first choice for harder materials, but the Green blade is an alternative and is dependent on the composition of the rock. The Green Blade will cut slightly harder material than the Orange blade. Also available as a sound-dampened blade to special order.

Orange Blade
The Orange blade will cut medium to hard material. Also available as a sound-dampened blade.

Pink Blade
The Pink blade is used for very hard to extremely hard core, complementing the Black blade. Note depending on the core the Black blade is better on some core than the Pink is on others.

Silver Blade
Alternative to the Black blade when cutting hard materials. Mainly for iron ore and other very hard materials. Harder and more abrasive material will generally reduce the life of the blade.

White Blade
The White blade is used for hard to very hard cores. It is an alternative to the Black blade and is dependent on the composition of the rock.

Yellow Blade
The Yellow blade will cut soft to medium hardness material with maximum total meters of core cut to each blade. Also available as a sound-dampened blade.

ALMONTE DIAMOND BLADE GUIDE – Hardness Scale
PLEASE NOTE: THIS GUIDE IS INTENDED ONLY AS AN INDICATION OF THE TYPE OF BLADE THAT COULD BE USED ON DIFFERENT MINERALS. IT IS KNOW THAT WITHIN EACH ROCK TYPE, THERE ARE VARIATIONS AND DIFFERENT LEVELS OF ABRASIVENESS.

A Austo

The post Almonte Automatic Core Saw Diamond Blade 12″ 300mm appeared first on Westernex Australia.