Featurs & Benefits
▪ A Hydraulic Core Tray Roller Racking which will tilt the core tray up and making it easier to view and mark-up the cores.
▪ Ergonomic for easy core logging.
▪ Fixed angle and lifting module to avoid core tray lifting.
▪ Adjustable Height.

The post Conveyor Roller Rack Inclined – 3000mm-Manual Lift appeared first on Westernex Australia.

Features & Benefits
▪ A Hydraulic Core Tray Roller Racking which will tilt the core tray up and making it easier to view and mark-up the cores.
▪ Ergonomic for easy core logging.
▪ Fixed angle and lifting module to avoid core tray lifting.
▪ Adjustable Height.

The post Conveyor Roller Rack Inclined – 1500mm-Hydraulic Lift appeared first on Westernex Australia.

Suitable for use with Aluminium Tags.

The post Number Punch Set appeared first on Westernex Australia.

Suitable for use with Aluminium Tags.

The post Letter Punch Set appeared first on Westernex Australia.

• Weights included: 1g, 2g(2), 5g, 10g, 20g(2), 50g, 100g, 200g
• Density: 7.96g/cm³
• Susceptibility: 0.01 – 0.005

The post Calibration Weight Set 1g – 200g appeared first on Westernex Australia.

• Available as a set which includes scale, plastic beaker and a full set of charts
• Requires no reference to seperate charts or tables, saves time and prevents errors in calculations
• Simply hang the filled container on the scale hook, read the information directly from the scale
• High quality internal parts ensure trouble-free operation and long life
• A majority of the internal components are manufactured in stainless steel or advanced polymers
• The scales correlates the specific gravity of the ore with the percent solids of the pulp
• This information is displayed on a circular scale for several specific gravities by use of a simple weigh scale
• The simplicity of the scale along with its many applications have made this a common feature at concentrators throughout the world
• The scale can be used for fast, accurate percent solids determinations at various points through-out a concentrator, enabling adjustments to be made to keep, for example, a grinding circuit running effectively
• A full inventory of spare parts and accessories is always available including buckets and charts
• All our charts and buckets are interchangeable with the Marcy Brand Pulp Density Scale Pulp Density Scales are often referred to as Pulp Density Balance, Specific Gravity Scale, Density Balance, Density Scale, Marcy Scale

Operating Instructions
CAUTION The Pulp Density Scales are accurately set at the factory. DO NOT remove the back cover plate to make adjustments.
The scales are constructed to provide trouble-free operation and will provide accurate measurements if the mechanism is not altered or abused.

Mounting
Allow the Pulp Density Scale to hang freely from its supporting ring.

Calibration
Fill the container with 1 litre of clear water. Use a file to remove any material from the bottom holes until water leaks out. NOTE: the holes are located to retain 1 litre of water in the container. Hang the container full of water on the scale hook. Turn the zero adjustment screw directly above the scale hook until the pointer is vertical, reading 1.000 on the outer ring. The scale is calibrated.

Determining the Specific Gravity of Dry Solids
The desired sample should be dry and between 10 mesh and 100 mesh (Tyler). Hang the dry, empty container on the scale and pour in the dry sample of dry material until the pointer indicates 1.000 Kilograms on the outer ring of the dial (the container now has 1.000Kg of material in it). Pour the sample onto a rolling cloth or sheet of paper. Fill the container one-third full with clear water and gradually stir in the dry sample. Insure that the sample is thoroughly wetted and that air bubbles are eliminated. Hang the container on the scale and add clear water to the overflow holes. Read the dry solids’ specific gravity on the innermost ring of the dial chart.

Taking a Sample
Fill the container with the desired pulp or liquid. The liquid level should reach the container overflow holes. Wipe off any spilled material on the outside of the container. Hang the filled container on the scale and determine the specific gravity or percent solids in the pulp.

Determining Percent Solids
If you know the specific gravity of the dry solids in the pulp (see determining the specific gravity of dry solids), you can directly read the percentage in the pulp on the dial chart. Select the correct dial face for the particular dry solid specific gravity in the pulp. Hang the filled container on the scale. The percent solids in the pulp read clockwise from the specific gravity number on the green, white and red rings of the dial chart.
EXAMPLE: A reading of 44% solids at 2.2 specific gravity also reads 39% solids at 2.6 specific gravity and 35% solids at 3.2 specific gravity.

Changing the Dial Charts
1. Remove both screws from the side of the Scale Face
2. Remove the Retaining Ring and Perspex Face
3. Remove the two screws attaching the dial chart to the scale
4. Insert your new Dial Chart
5. Replace Retaining Ring and Perspex Face
6. Replace Screws on Side of the Scale
7. Recalibrate the scale as detailed earlier

NOTE: Attached to each scale is a dial chart which has the following specific gravity range of dry solids.

The post Pulp Density Scale appeared first on Westernex Australia.

• Strong metal box
• Slim & compact
• Genuine alpha gold series jobber drill bits
• Security hang tab
• Feeds & speeds chart inside every drill set
• Sizes available: 1.0 – 13.0 in 0.5mm increments

The post Drill Bit Set appeared first on Westernex Australia.

Kit contains:

• Tyre Repairs Made Easy instruction manual
• 10 x Tubeless Strings
• 1 x Reamer Handle
• 1 x String Insertion Handle
• 3 x Mini Tube Patches
• 3 x Small Tube Patches
• 3 x Medium Tube Patches
• 3 x Large Patches
• 1 Radial Patch
• 1 Uni Patch
• 4 x 10cc Tube Vulcanising Cement
• 1 Rasp/Stitcher
• 1 Snap-in Tubeless Valve
• 1 3-way Value Tool
• 3 x Short Core Valve Caps
• 3 x Slotted Metal Valve Caps
• 1 x Blade
• 1 x Marking Chalk

The post Tyre Pliers Kit appeared first on Westernex Australia.

5 piece Sieve set  with the following wire mesh:

• Mesh aperture: 12.7mm, Thickness: 1.40mm
• Mesh aperture: 6.35mm, Thickness: 0.95mm
• Mesh aperture: 3.175mm, Thickness: 0.60mm
• Mesh aperture: approx. 2mm, Thickness: 0.45mm
• Mesh aperture: 1.27mm, Thickness: 0.35

The post 5 Piece Sieve Set appeared first on Westernex Australia.